1. This model is fit for Nintend Switch console. The controller has the function of vibration and sensor, which can be used by cable and Bluetooth.
2. The controller consists of 24 buttons and 2 high-precision 3D. The left controller consists of up, down, left, right, -, screen shot, SL, Sr, mode, L1, L2 and left 3D. The right controller consists of a, B, x, y, home, SL, Sr, mode, R1, R2 and right 3D.
Color: red and blue
Current after successful connection: ≤ 30mA
Current when the controller vibrates: ≤ 80mA
Controller off: ≤ 15uA
Current when charging controller: ≤ 350mA Max
Voltage at controller charging: DC 5V
Bluetooth distance: 8-10m
Working time: working time for playing vibration game: ≤ 10h
Working time without vibration game: ≤ 20h
Product size: about 100 * 40 * 15mm/3.93*1.57*0.59\'\'
Package weight: 164g
1. Switch console settings:
Turn on the console fit for Nintend Switch, press \"Settings\" on the menu, and then click \"system settings\"-\"flight mode\"- \"controller connection\" to open the Bluetooth function.
2. Connect console fit for Nintend Switch via Bluetooth:
A. Press any up / down / left / right of the left controller and A / B / X / Y of the right controller to turn on the controller and the 4 indicator will flash.
B. Press the mode button on the left or right controller for 3 seconds, the LED will remain flashing and enter Bluetooth pairing mode.
C. Open the main screen of the console, click \"controller\" on the menu, and then click \"change fixture / order\". The console will automatically search and pair the controller. After connecting the controller, press the A key, and click \"close\" to enter the menu to play the game.
3. Automatic continuous connection:
If the controller is connected to the console and Bluetooth of the console is turned on, the controller will automatically connect to the console when the controller is turned.
4. Turn on/off the charging / sleeping mode of the controller:
A. On / off controller:
Press up / down / left / right of the left controller or A/ B / X / Y of the right controller to open the controller. If the controller is on, the 4 LED will flash slowly and circularly. Press the mode button for 3 seconds to enter the pairing mode, and release the mode button after the 4 LED fast cycle flashes. If the pairing is successful, the LED will illuminate. Press the mode button for 3 seconds and the controller will turn off when the console is connected.
B. Charging mode of controller:
1) when the controller is off, charge the controller through USB, and the 4 LED will flash slowly. When fully charged, the 4 lights will turn off.
2) when the controller is connected to the console through the slideway, if the console is charged through USB, the console will be charged by the console. (if the console is not charged and the controller voltage is lower than 3.7V, the controller will also be charged by the console.
C. Sleep mode of the controller:
1) under pairing, if the controller fails to connect with the console, the controller will automatically shut down and enter sleep mode.
2) if the controller does not operate within 5 minutes after connecting the console, the controller will automatically shut down and enter sleep mode.
Please reset the controller, if the controller is abnormal, such as button disorder, crash, connection problems, etc. Please use a slender object, such as a needle, to insert and press the reset hole controller on the back, and the controller will be reset.
6. Sensor calibration:
Put the controller on the workbench, press \"SR mode\" to turn on the controller, LED1 and LED2 will light up. Then press SL to calibrate. Please note that the controller must be on the table.
7. 3D calibration:
Press L3 / R3 to turn on the controller, LED3 and LED4 will light up. Press SL to start calibration. LED 1 / 2 / 3 / 4 will light up. Shake the controller several times, then press SL to complete the test.
8. USB description:
The USB connector is used to charge and update the controller\'s system. When charging the controller via USB, the controller cannot connect to the console by sliding mode to avoid breaking the console.
9. Update the system of the controller:
If the console has been updated, you also need to update the controller. Press SL and up / down / left / right of left controller or A / B / X / Y of right controller to enter PC mode. Connect PC via USB (or press SL and connect PC via USB) and update controller via system.
10. Support wired function:
By sliding the controller onto the switch console, the controller will automatically connect to the console, and then the Bluetooth part of the controller will disconnect the Bluetooth of the console. When the controller is powered off, the console will charge the controller when it is wired to the console.
The controller is used for the switch console. The console can support up to 7 controllers (4 left-hand controllers and 3 right-hand controllers or 3 left-hand controllers and 4 right-hand controllers) and can be connected to the console at the same time.
11. The handle supports NFC function. When the game doll or card is placed on the handle NFC antenna (less than 10 mm), the handle will automatically communicate with the doll or card to realize the game function;
12. Somatosensory function. The handle is equipped with gyroscope gravity sensor, and the handle can be swung to realize the body sense game function.
Please allow 1-3mm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.
2 X Wireless Controllers
2 X Lanyards
1 X Charging Cable
1 X User Manual