1. With the snap-locked locking structure, the shell can be easily opened for mode adjustment without tools, which is convenient to use;
2. High end high voltage power management chip, lower power consumption, better quality, more stable output;
3. The shell is made of PC, which is flame-resistant and high-temperature resistant. It is not easy to deform under high temperature and difficult to burn under open flame.
4. Suitable for indoor lighting / roof cooling system / fan / roller door, etc.
Code clearing method:
1. Press and hold the learning button for 4 ~ 8 seconds. When the LED turns off and on again, it indicates that the code is successfully cleared. Then the learned control cannot control the receiver remotely;
2. It can store up to 20 sets of codes at the same time, and the earliest set of codes will be cleared if more than 20 sets.
Working voltage: AC 85-250V
Maximum load: 1000W
Signal sensitivity: -105dB
Working mode: jog / self-lock / interlock (adjustable)
Working temperature: -40 ~ +80 °C
Working frequency: 433MHz
Product size: 60 * 50 * 25mm/2.36*1.97*0.98\"
1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual color of the item because of different photographing light, angle and display monitor.
1 X RF Receiver
1 X Remote Control (NO Battery)